Adjusting the shelf glide, Adjusting the refrigerator shelves, To remove shelves – Whirlpool 3VET19ZK User Manual
Page 9: Removing the meat drawer and cover, To remove the meat drawer, To remove the cover
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
Adjusting the shelf glide
Use the shelf glide to secure odd-shaped
items or to separate other items.
To adjust the shelf glide:
1. Grasp glide.
2. Slide glide along track.
NOTE: The shelf glide cannot be removed.
Adjusting the refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator.
To remove shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear shelf hooks into the slots
in the shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into
slots. Lower front of shelf to level position.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
4. Replace cover in reverse order.
Pull out to the stop,
lift the front and pull
again.