Whirlpool 8ED27DQ - Manual (Page 9)

Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed. If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 23.)
RECOMMENDED
CONDITION: REASON: CONTROL SETTINGS:
If Refrigerator Door opened often Refrigerator 4
Section is Large amount of food added Freezer A
TOO WARM Room temperature too warm
If Freezer Door opened often Refrigerator 3
Section is Large amount of food added Freezer C
TOO WARM Very cold room temperature
(can’t cycle often enough)
If Refrigerator Controls not set correctly Refrigerator 2
Section is
TOO COLD for your conditions Freezer B
If ICE isn’t Heavy ice usage Refrigerator 3
MADE FAST Very cold room temperature Freezer C
ENOUGH (can’t cycle often enough)
If BOTH Door opened often Refrigerator 4
SECTIONS Large amount of food added Freezer B
are TOO WARM Very warm or very cold room
temperatures
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
To remove glass shelves:
1. Remove items from shelf.
2. Slide shelf out with an even, constant pull.
3. Lift front and siide the rest of the way out.
To move shelf guides to a new position:
1 ■ Lift front of guide. Puli guide forward off rear
support. Repeat for other guide.
2. To repiace guide, push guide onto rear
support. Push front of guide down onto
support.
To replace glass shelves:
1. Guide rear of sheif into sheif guide.
2. Siide sheif into piace.