Replacing the compactor bag, Removing a filled bag, Installing a new bag – Whirlpool TU4000 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing the compactor bag
Removing a filled bag
Pull all four bag cuffs up.
Tuck in slotted sides.
Bring top edges together and fold to close bag.
Push side-lock lever down and tilt drawer side open.
Using both hands on the fold, remove the bag.
Carry the bag only by the folded top. Be careful when
removing and carrying the filled bag. Bits of glass may
stick through the sides of the bag.
Installing a new bag
Be sure the drawer side is securely locked.
Put unopened bag in drawer as shown. Spread front
bag corners and slide cuff over right-front corner.
Spread rear bag corners and slide cuff over left-rear
corner.
Press inside of bag against drawer bottom, sides and
corners for smooth fit.
DO NOT USE ANY KIND OF BAG OTHER
THAN THE PLASTIC-LINED PAPER BAGS
DESIGNED ESPECIALLY FOR USE IN YOUR
COMPACTOR. TRASH MASHER® Compactor
bags may be purchased from your Whirlpool
Appliance Dealer (Part No. 675186) or from
Whirlpool Corporation, LaPorte Division, 1900
Whirlpool Drive, LaPorte, Indiana 46350.