CNET CWP-800 - Manual (Page 19)

5. The Profile Settings screen has drop-down menu to select the encryption type. If you enable
encryption function, Select the encryption type and Authentication Mode. Click the Next button to
continue or the Back button to return to the previous screen. If you disable Encryption, go to Step7.
Encryption (Off/64 bits /128 bits) - If you do not want to use WEP encryption, choose Off. To use
WEP encryption (recommended to increase network security), select 64 bits or 128 bits from the
drop-down menu, and select Authentication Mode, Open System/ Shared Key.
5. Select which Input Method you want to use. It supports three modes: Alphanumeric/
Hexadecimal/Passphrase. Enter your encryption key.
Key 1 - This WEP key must match the WEP key of your wireless network. If you are using 64-bit WEP
encryption, then the key must consist of exactly 10 hexadecimal characters. If you are using 128-bit