CHEVROLET 2010 Silverado User Manual

Page 552

5. Raise the tire part way upward. Make sure the

retainer is seated in the wheel opening.

6. Raise the tire fully against the underside of the

vehicle by turning the wheel wrench clockwise until
you hear two clicks or feel it skip twice. You cannot
overtighten the cable.

7. Make sure the tire is stored securely. Push,

pull (A), and then try to turn (B) the tire. If the tire
moves, use the wheel wrench to tighten the cable.

8. Reinstall the spare tire lock, if the vehicle has one.

To store the jack and jack tools:

A. Wing Nut Retaining

Wheel Blocks

B. Wheel Blocks

C. Wing Nut Retaining

Tool Kit

D. Wheel Wrench and

Extensions

E. Tool Bag

F. Jack Mounting Bracket

G. Jack

H. Bolt Retaining Wheel

Blocks

1. Put the tools (D) in the tool bag (E) and place them

in the retaining bracket (C).

2. Tighten down the wing nut (C).

6-108