CHEVROLET 2011 Colorado - Manual (Page 321)

Black plate (75,1) Chevrolet Colorado Owner Manual - 2011
Vehicle Care 10-75
10. Put the wheel nuts back on
with the rounded end of the
nuts toward the wheel. Tighten
each wheel nut by hand. Then
use the wheel wrench to
tighten the nuts until the wheel
is held against the hub.
Front Position
Rear Position
11. Turn the wheel wrench
counterclockwise to lower the
vehicle. Lower the jack
completely.
{
WARNING
Wheel nuts that are improperly or
incorrectly tightened can cause
the wheels to become loose or
come off. The wheel nuts should
be tightened with a torque wrench
to the proper torque specification
after replacing. Follow the torque
specification supplied by the
aftermarket manufacturer when
using accessory locking wheel
nuts. See Capacities and
Specifications on page 12‑2 for
original equipment wheel nut
torque specifications.