beautypg.com

Taillamps, turn signal, Sidemarker, stoplamps, and back-up lamps -27, Vehicle care 10-27 – CHEVROLET 2012 Impala User Manual

Page 257

background image

Black plate (27,1)

Chevrolet Impala Owner Manual - 2012

Vehicle Care

10-27

Taillamps, Turn Signal,
Sidemarker, Stoplamps,
and Back-Up Lamps

A. Rear Sidemarker Lamp

B. Back-up Lamp

C. Stoplamp/Taillamp/Turn Signal

To replace one of these bulbs:

1. Open the trunk. See Trunk on

page 2‑9.

2. Remove the convenience net (if

equipped). Unhook the net from
the upper wing nut.

3. Turn the upper wing nut

counterclockwise and remove it.

4. Pull the carpet away from the

rear of the vehicle.

5. Turn the two hex nuts

counterclockwise to
remove them.

6. Pull out the taillamp assembly

and disconnect the wiring
harness.

7. Turn the bulb socket

counterclockwise to remove it.

8. Pull the old bulb straight out to

remove it.

9. Push the new bulb straight in

until it clicks to install it.

10. Reverse steps 1 through 7 to

reinstall.