Champion Power Equipment C90006 - Manual (Page 3)

2
WARNING When loading your basket do not exceed the ATV manufacturers rack weight
carrying capacity.
Ref# QTY DESCRIPTION
1 1 Rear Basket. Flat
2 8 Mounting Brackets
3 8 M6x75 Bolts
4 16 Ø6 SAE Washer
5 8 M6 Nylon Nut
6 2 Plug Sq Tube
FRONT BASKET
Assembly Instructions:
1. If mounting the basket on an ATV rack without an upright, attach filler clamps to the basket. The
long clamp will lie over the opening with the flat side up, as shown. The two smaller clamps are
installed from below the basket. Secure with (2) M6x15 bolts and lock nuts.
2. Center the basket over the front rack of the ATV. Note, depending on the type and size of rack
upright, it may have to be removed before the basket can be installed.
3. Place and stick self-adhesive pads (included) between basket and ATV rack to prevent
scratching.
4. Mount using the same methods as the rear basket.
WARNING When loading your basket do not exceed the ATV manufacturers rack weight
carrying capacity.