Creda TCS3 - Manual (Page 5)

To open the door The features
Press and release the front
panel in position shown
Dryer Description
3
Water container
Air intake
grille
Rating plate
Door catch
Filter
Door latch
Model &
Serial
numbers
Condenser cover handle
(Pull to open)
Condenser cover
Installation
Description
Star
t and
Pr
ogrammes
Laundr
y
W
arnings and
Sug
g
estions
Maintenance and
Care
T
roub
leshooting
Ser
vice
GB
The Drying Guide allows you to consult a user friendly
table of fabric types and load capacities.
The Empty Water light signals that the water container
is full and must be emptied. The light will take a few
seconds to go out after replacing the empty water
container, the dryer must be running for this to happen.
The PROGRAMMES knob sets the programme:
rotate until the indicator is pointing to the programme
you want to select (
see Start and Programmes ).
The START button begins drying a selected
programme ( see Start and Programmes ).
The HEAT button selects drying temperature ( see
Start and Programmes ).
Out: HIGH Heat
In: GENTLE (LOW) Heat
The ALARM buzzer signals the end of a drying cycle.
Out: buzzer ON
In: buzzer OFF
Control panel
PROGRAMMES
Knob
HEAT
Button
START
Button
Empty Water
Light
Indicator ALARM
Button
Drying Guide