Champion Power Equipment 14051 - Manual (Page 14)

11
REV 14051-20131202
ENGLISH 14051
MaINTeNaNCe
The owner/operator is responsible for all periodic
maintenance . lubrication
All moving parts within the Electric Winch having
been Lubricated using high temperature lithium
grease at the factory . No internal lubrication is
required . Lubricate Cable Assembly periodically
using a light penetrating oil .
synthetic rope replacement
It is recommended that any modifications be
performed by a manufacturer’s authorized repair
facility, and that only manufacturer-supplied parts
be used .
1 . Move the clutch to the “Out” position .
2 . Extend Synthetic Rope to its full length .
Note how the existing rope is connected to
the inside of the drum .
3 . Remove old Synthetic Rope and attach new
one .
4 . Retract Synthetic Rope onto drum being
careful not to allow kinking .
Complete all scheduled maintenance in a timely
manner . Correct any issue before operating the
winch .
Never operate a damaged or defective winch .
WarNING
Improper maintenance will void your warranty .
WarNING
For service or parts assistance, contact our
help line at
1-877-338-0999
NoTe
synthetic rope
Periodically rinse the synthetic rope with water
to remove any sand, dirt, mud, or debris that can
become embedded or build up in the rope during
use . This will help extend the life of the rope .
Inspect rope before and after each use . If
rope becomes frayed it must be replaced .
NoTe