Champion Power Equipment 46598 - Manual (Page 19)

REV 46598-20130327
16
46598 ENGLISH
Engine Specifications
– Model YF168FD-2-010
– Displacement 196cc
– Type 4-Stroke OHV
– Start Type Recoil
Oil
Use 10W-30 automotive oil.
Oil capacity is 0.63 qt. (0.6 L).
DO NOT OVERFILL.
Please reference the following chart for recommended
oil types for use in the generator.
fuel
Fuel capacity is 3.8 gal. (14.4 L). Use regular unleaded
gasoline with a minimum octane rating of 85 and an
ethanol content of less than 10% by volume.
Generator Specifications
– Model 46598
– Running Wattage 3500 Watts
– Starting Wattage 4000 Watts
– AC Load 120/240 V
– Phase Single
– Frequency 60 Hz
– Fuel Capacity 3.8 gal. (14.4 L)
– Gross Weight 105.8 lb. (48 kg)
– Net Weight
– Height 18.1 inches (45.9 cm)
– Width 17.8 inches (45.1 cm)
– Length 23.2 inches (59 cm)
SPECIfICATIONS
Maintenance Valve Clearance
– Intake: 0.13 – 0.17 mm (0.005 – 0.007 in.)
– Exhaust: 0.18 – 0.22 mm (0.007 – 0.009 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
Spark Plugs
OEM spark plug: NHSP F6RTC
Replacement spark plug: NGK BPR6ES or equivalent
Make certain the spark plug gap is 0.7 - 0.8 mm or
(0.028 - 0.031 in.).
An Important Message About Temperature
Your Champion Power Equipment product is designed
and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed your product may be operated at temperatures
ranging from -15°C (5°F) to 50°C (122°F) for short
periods. If the product is exposed to temperatures
outside this range during storage, it should be brought
back within this range before operation. In any event,
the product must always be operated outdoors, in a
well-ventilated area and away from doors, windows and
other vents.
99.2 lb. (45 kg)