Champion Power Equipment 71532 - Manual (Page 23)

REV 71532-20140125
20
71532 ENGLISH
Oil
Use 10W-30 automotive oil.
Oil capacity is up to 1.2 qt. (1.1 L).
DO NOT OVERFILL.
Please reference the following chart for recommended
oil types for use in the generator.
Fuel
Fuel (Gas) capacity is 6.1 gal. (23 L).
– Use regular unleaded gasoline with a minimum
octane rating of 85 and an ethanol content of less
than 10% by volume.
– Use only an approved LPG cylinder equipped with an
OPD valve.
SPECIFICATIONS
Engine Specifications
– Model YF190FD-2-L_G
– Displacement 439cc
– Type 4-Stroke OHV
– Start Type Electric Start
Generator Specifications
– Model 71532
– Running Wattage 6000 Watts
– Starting Wattage 7400 Watts
– AC Load 120/240 V
– Phase Single
– Frequency 60 Hz
– Fuel Capacity 6.1 gal. (23 L)
– Gross Weight 209.4 lb. (95 kg)
– Net Weight 194 lb. (88 kg)
– Height 26.4 in. (67.1 cm)
– Width 28.7 in. (72.9 cm)
– Length 27.8 in. (70.3 cm)
Maintenance Valve Clearance
– Intake: 0.13 – 0.17 mm (0.005 – 0.007 in.)
– Exhaust: 0.18 – 0.22 mm (0.007 – 0.009 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
Spark Plugs
OEM spark plug: NHSP F6RTC
Replacement spark plug: NGK BPR6ES or equivalent
Make certain the spark plug gap is 0.7 - 0.8 mm or
(0.028 - 0.031 in.).
An Important Message About Temperature
Your Champion Power Equipment product is designed
and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed your product may be operated at temperatures
ranging from -15°C (5°F) to 50°C (122°F) for short
periods. If the product is exposed to temperatures
outside this range during storage, it should be brought
back within this range before operation. In any event,
the product must always be operated outdoors, in a
well-ventilated area and away from doors, windows and
other vents.