Chameleon Labs 7602 MKII X-Mod - Manual (Page 4)

Front Panel Controls:
(Left to Right)
Switch general rule: When the switch is moved toward the function label,
the feature is selected.
Power-
This switch applies power to the unit.
(When the optional CPS-
1 is used this switch is inoperative and the power is controlled by the switch on
the CPS-1)
300/1.2K Ohm-
This switch selects the microphone input impedance to
either 300 or 1,200 Ohms.
48V Switch-
This switch supplies 48VDC (Phantom Power) to the
Microphone Input XLR jack.
DI Switch-
This switch routes the Direct Input jack into the unit.
Microphone / Line sensitivity-
This pot controls input level for the microphone and
line inputs. The microphone and line inputs have their
own input connectors on the rear panel and a separate
input transformer. Each rear input has its own section
of the control on the input gain selector switch. The
microphone section provides 20 to 80dB of boost in
4