Cadillac 2005 Escalade - Manual (Page 17)

Refer to Owner Manual for further information.
Driver
Information
Seats and
Mirrors
Automatic
Climate
Controls
Vehicle
Personalization
Owner
Privileges TM
Entertainment/
Convenience
Features
Drive and
Security
Systems
Alarm Warning
(The feedback received when the
alarm is active.)
•
Alarm Warning: Both
• Alarm Warning: Off
• Alarm Warning: Horn
• Alarm Warning: Lamps
Language
(The Driver Information Center
display language.)
•
Language: English
• Language: Francais (French)
• Language: Espanol (Spanish)
Display Units
(The units in which all information
will be displayed.)
•
Display Units: English
• Display Units: Metric
ODOMETER/TRIP SETTINGS
Press the Trip
Information
button ( )
to scroll
through the
ODOMETER,
TRIP A, TRIP B,
TIRE PRES-
SURES, TIMER and ENGINE HOURS
choices.
Your vehicle’s trip odometers A and
B operate only when they are
turned on. To turn on or off Trip A
and B odometers, press the Select
button ( ).
Odometer: Press until ODOMETER
appears on the display. This mode
shows the total distance the vehicle
has been driven in either miles or
kilometers. Pressing the reset stem
located on the instrument cluster
with the vehicle off will also display
the odometer.
Trip A: Press until TRIP A appears
on the display. This mode shows the
current distance traveled since the
last reset for TRIP A in either miles or
kilometers.
Trip B: Press until TRIP B appears
on the display. This mode shows the
current distance traveled since the
last reset for TRIP B in either miles or
kilometers.
Reset Trip Information
To reset TRIP A or TRIP B information,
press and hold the Select button ( )
for one second while in one of the
trip modes. This will reset the
information for TRIP A or TRIP B.
You can also reset TRIP A or TRIP B
while they are displayed by pressing
the reset stem on the cluster. If you
press and hold the reset stem or
four seconds, the display will show
the distance traveled since the last
ignition cycle for TRIP A or TRIP B.