Burris Droptine User Manual
Page 4
Windage/Elevation Adjustment for E1 Hunter Knobs
The low profile E1 Hunter Knobs feature a finger
adjustment for both windage and elevation.
Once you have successfully zeroed your scope,
you can set the zero on your dials with these
simple steps:
1) With turret caps removed, grip knob top firmly
to keep knob from turning.
2) Put pen or other small object into the small
hole located on the dial.
3) Keeping firm grip on the knob, use the pen to
turn the dial back to zero, lining up the number
zero with the white indicator dot. Only the
numbered dial should move – do not allow the
entire knob to move or else you will alter your
windage and elevation zero settings.
NOTE: You do not have to set the zero on your
dials for your scope to function properly. Doing
so can give you peace of mind that your zero is
set, plus you can easily confirm if it has moved at
any time, but this step is optional.
3