Buick 2001 Park Avenue - Manual (Page 330)

6-67
Instrument Panel Fuse Block and Bussed Electrical
Center (BEC)
The instrument panel fuse block and BEC are located
on the passenger’s side of the vehicle, under the
instrument panel.
Remove the hush panel on the passenger’s side to reveal
the fuses. To remove the panel, do the following:
1. Remove the two 7 mm screws located along the front
edge of the panel.
2. Lower the hush panel.
3. Remove the cover. Now you can see the fuses and
replace them.
4. Place the wide end of the fuse puller over the plastic
end of the fuse.
5. Squeeze the ends over the fuse and pull it out.
When finished, reinstall the hush panel. Reinstall lamps,
connectors, and HVAC duct temperature sensors if they
were removed.
Instrument Panel Fuse Block
Fuse Usage
SBM Interior Lamps
PDM PDM Module
A/C HVAC Motor, HVAC Mix Motors