Headlamp exit delay – Buick 2007 Rendezvous User Manual
Page 241
4. The program mode message will appear in
the message center as an indication that
your vehicle is ready to begin programming.
5. Follow the instructions given by the DIC.
Headlamp Exit Delay
This feature allows you to customize the
headlamps and parking lamps. This feature can
be programmed to one of the following modes:
OFF: The headlamps and parking lamps will not
turn on at the same instant that the ignition is
turned to OFF.
15: The headlamps and parking lamps will stay
on for 15 seconds when the ignition is turned
to OFF.
30: The headlamps and parking lamps will stay
on for 30 seconds when the ignition is turned
to OFF.
60: The headlamps and parking lamps will stay
on for 60 seconds when the ignition is turned
to OFF.
Your vehicle was originally programmed to
30 second mode. The mode may have been
changed since then. To determine the current
mode, or to change the mode, do the following:
1. Follow the instructions for “Entering
Programming Mode” listed previously.
2. Press the MODE button until HEADLMP EXIT
DELAY appears in the DIC.
3. Press the SET button until the arrow is before
the mode you prefer.
The mode you selected is now set. You can either
exit programming mode by following the
instructions later in this section or program the
next feature available on your vehicle.
United States
Canada
241