Recording, Connecting the blackvue to an av product, Removing the blackvue from the holder – BlackVue DR300G User Manual
Page 13
11
Connecting the BlackVue to an AV Product
VideoXOUTXCable
VideoXINXcable*
1.
Connect the BlackVue’s [AV OUT] terminal to the AV unit using
the Video OUT/IN cable (accessory).
X
N YouXcanXviewXtheXreal-timeXvideoXofXtheXBlackVueXthroughXtheXconnectedXAVX
product.
X
N YouXcannotXplayXtheXfilesXrecordedXbyXBlackVue.
X
N IfXyouXuseXtheX[AVXOUT]XportXofXBlackVue,XtheXframeXrateXdecreases.
X
N However,XsomeXnavigationXsystemsXareXnotXcompliantXwithXtheXprovidedXVideoXIn*XX
cable.XReferXtoXtheXuserXmanualXforXtheXnavigationXsystemXtoXcheckXtheX
compatibilityXwithXtheXprovidedXVideoXInXcable.
Removing the BlackVue from the Holder
1.
While pressing the [LOCK] button for the holder, pull the main body of the
BlackVue as shown in the figure.
2.
The main body of the BlackVue is easily removed from the holder.
X
N AssemblingXitXintoXtheXholderX:XAlignXtheXgroovesXofXtheXmainXbodyXofXtheX
BlackVueXwithXthoseXofXtheXholderXandXslideXtheXmainXbodyXintoXtheXholderXuntilX
youXhearXaXclick.X