BlackVue DR600GW-HD V.1.01 - Manual (Page 15)

DR600GW-HD 15
Caution
y Do not remove the microSD card while it is saving or reading data.
The data may be damaged or malfunction caused.
y Copy important data to other storage media to store. Pittasoft Co.,
Ltd. will not be held responsible for data loss due to user negligence.
Note
y Insert or remove the microSD card only when the product is turned
off.
y microSD cards are consumables. Replace them after prolonged use.
Installation
1
Stop the engine where there is some light and in a safe place, and then
remove the key.
2
Attach the product to the windshield glass with the double-sided tape.
Set the camera lens to point directly forwards to the center when install-
ing it. After installing the product, remove the lens cap.
3
Use the power cord to connect the DC IN of the product to car's power
socket.
Note
y It is recommended to use Power Magic (the Battery Discharge Pre-
vention Device) to record video while the car is parked.
y To use the BlackVue at the same time as other equipment, purchase
and use a two-way adaptor.