Cobra Electronics 14 BAND XRS 9570 - Manual (Page 6)

Settings
Your Detector
Nothing Comes Close to a Cobra ® 7
Settings
Your Detector
6 English
Highway/City Mode
Setting your detector to City mode delays all X band audio alerts until the
signal strength reaches Level 3. (A single beep will sound when the signal is
first detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conflicting X band signals such
as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates what
you will see and hear (either in Voice Alert or Tone Alert mode) as you
complete each step. The factory setting is Highway mode.
City Mode
To Change From Highway Mode to City Mode
Press and release
the City button.
Tone Voice Visual Display
One beep City City blinks, then c appears
in the display
To Change From City Mode Back to Highway Mode
Press and release
the City button again.
Tone Voice Visual Display
Two beeps Highway Highway blinks, then h
appears in the display
Highway Mode
h
c
DigiView Data Display Brightness
You can choose from four (4) settings for Brightness of the display. You can
cycle through the settings by repeatedly pushing the Dim button. The factory
setting is Bright.
To Change the Brightness to Dim
Press and release
the Dim button
once.
Tone Voice Visual Display
One beep Dim Dim blinks, then
display dims
To Change the Brightness to Dimmer
Press and release
the Dim button
again.
Tone Voice Visual Display
One beep Dimmer Dimmer blinks, then display
dims further
To Change the Brightness to Dark
Press and release
the Dim button
a third time.
Tone Voice Visual Display
One beep Dark Dark blinks, then display
goes dark (no visual alerts
will be seen)
To Change the Brightness to Bright
Press and release
the Dim button a
fourth time.
Tone Voice Visual Display
Two beeps Bright Bright blinks, then display
returns to full brightness
Dark Indicator
.
City Button
Press and
release
Settings
•
When changing the Settings on your detector, please keep in mind:
g
Buttons can have multiple functions.
g
Depending on your choice of Voice Alert or Tone Alert mode, you will
hear either voice messages or tones confirming changes in settings.
g
All settings will be stored in memory when the power is
turned Off and recalled when the power is turned back On.
Dim Button
Press and
release
Press and
release
Dim button
Bright
Dark Dim
Dimmer
XRS9570_MANL.indd 6-7 8/24/10 9:25 AM