Avlink VH-01 - Manual (Page 2)

REAR VIEW
1. Vertical position adjust
Adjust switch when screen position is right or left
slant.
2. Horizontal position adjust
Adjust switch when screen position is lower or upper.
3. Sharpness adjust
Adjust switch “SHARP” To correct flickering text or
line.
4. “HDMI Out” Port
5. Input Power Jack
TOP VIEW
1. Power LED
-3-
Installation
1. Turn off the PC and monitor.
2. Connect the VGA male and 3.5Ø male extension cable
between the PC and the “VGA In” port of VH-01.
3. Connect the HDMI Female extension cable between the
monitor and the “HDMI Out” port of VH-01.
4. Connect the power cord and turn on the VH-01.
5. Turn on the PC and digital monitor or projector.
Support VGA mode
Analog Resolution Frequency(Hz)
VGA 640x480 60 / 72 / 75 / 85
VGA 720x400 70 / 85
SVGA 800x600 56 / 60 / 72 / 75 / 85
WVGA 848x480 60
XGA 1024x768 60 / 70 / 75 / 85
SXGA 1152x864 75
SXGA 1280x768 60RB/ 60 / 75 / 85
WXGA 1280x800 60
SXGA 1280x960 60 / 85
SXGA 1280x1024 60 / 75 / 85
WXGA 1360x768 60
SXGA+ 1400x1050 60RB / 75
WXGA+ 1440x900 60
SXGA+ 1440x1050 60
UXGA 1600x1200 60
WSXGA+ 1680x1050 60
1080P 1920x1080 60
WUXGA 1920x1200 60RB
720P 1280x720 60
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-4-