Audio Note Kassai - Manual (Page 3)

MANUAL-ZX158
3
Installation
Select a suitable location for the units ensuring that adequate ventilation
clearance is provided allowing at least 30cm. of space above the units. This is an
important consideration as the amplifier generates substantial heat during
normal operation. Be sure not to install the amplifier into a cabinet with
restricted air flow or onto a thick pile carpet.
In the interest of safe, reliable operation situate the amplifier away from
dampness or direct sunlight. Site the unit on a flat and firm surface capable of
sustaining the amplifier’s weight. Worthwhile sonic improvements may be
obtained by locating the amplifiers on a purposely designed audio support
system.
CONNECTION – Inputs
Each amplifier has a single RCA socket on the back panel for connection to your
preamplifier marked as Input. The sockets are colour coded Black for Left
channel and Red for Right channel.
CONNECTION – Speakers
Each amplifier is equipped with three colour coded standard binding posts for
connection to your speakers.
Connect the amplifiers black speaker output binding post marked as “ 0 ” to the
black terminal (also marked “ – “) on the speaker.
Connect the amplifiers red speaker output binding post marked “8 Ohm” to the
red terminal (also marked “ + “) on the speaker.
The other red speaker output binding post is marked “4 Ohm” and may be used
with 4 Ohm speakers. If you are uncertain whether your speaker system is of 4