Audio Note Jinro - Manual (Page 10)

Line inputs Four line level inputs are available, located on the left side of the
amplifier, at the front of the panel. For sonic purity, it was decided to
not offer any tape / pre outputs on the JINRO. All four inputs are line
level, and can be connected to a suitable line level source of your
choice, such as CD / DAC, phonostage, etc.
Ground Post A ground post is provided for connection to those source components
that also use a separate ground terminal.
Speakers
Each channel is equipped with 2 colour coded binding posts for
connection to your speakers.
Looking from the front of the amplifier, the 2 binding posts to the left
are for the left channel and the 2 binding posts to the right are for the
right channel.
Connect the amplifiers black speaker output binding post to the black /
negative terminal (also marked “ – “) on the speaker.
Connect the amplifiers red speaker output binding post to the red /
positive terminal (also marked “ + “) on the speaker.
Mains
The JINRO is equipped with an IEC 320 mains inlet socket. Use the
supplied mains cable to connect the unit to the local mains supply.
The mains fuses are located in separate fuse holders located on the
rear panel.
Special Note – Make sure that all connections are tight and clean. For
best results use good quality audio interconnects. Although it is
perfectly acceptable to use cables manufactured by other companies,
for best results and performance, we recommend our own Audio Note
(UK) range of interconnects and loudspeaker cables. For further
information, please consult your nearest Audio Note (UK) dealer, or
alternatively please feel free to contact us directly.
CONNECTION