AquaCraft VS1 - Manual (Page 4)

4 4
PARTS NEEDED TO
COMPLETE YOUR VS1
RADIO SYSTEM:
• Futaba
® 3PM 2.4GHz Transmitter, Receiver and Switch
Harness (FUTK2020) OR Futaba 4PK 2.4GHz Transmitter,
Receiver and Switch Harness (FUTK4900)
• Steering Servo, Futaba S3305 (FUTM0045), OR Futaba
S9405 (FUTM0098)
• Throttle Servo, Futaba S3115 (FUTM0415) OR Futaba
S3201 (FUTM0034)
• Receiver pack, DuraTrax ® 5-cell 6V NiMH (DTXM2011)
• Futaba Receiver Pack Wall Charger (FUTM1705)
• 8AA batteries (transmitter) (3PM Only)
• Boat stand
ENGINE:
• O.S.
® 21XM Marine Outboard Engine (OSMG1721)
or equivalent
ACCESSORIES NEEDED TO
OPERATE YOUR VS1
• TorqMaster ™ Electric Starter (HCAP3200)
• 30% Boat Fuel (ODOP3130, Quart) or 50% Boat Fuel
(ODOP3150, Quart)
• Hot Shot ™ 2 Glow Igniter (HCAP2520)
• Hand Crank Fuel Pump (HCAP3015)
• Fuel Line (AQUB6903)
• Fuel Filter (GPMQ4150)
• Glow Plug Wrench (GPMP2000)
• AquaCraft GrimRacer
™ Pro Radio Box Tape (AQUB9514)
• AquaCraft GrimRacer Speed Grease (AQUB9500)
TOOLS NEEDED TO COMPLETE
YOUR MODEL
• Soldering Iron
• Solder
• Small Phillips Screwdriver
• 5-64 Hex Wrench
• Needle Nose Pliers
• Hand Drill
• Drill Bits
• Silicone Sealer
• Masking Tape
• 12-Minute Epoxy
• Denatured Alcohol
• Paper Towels
• Rotary Tool with Cut-Off Wheel
• Side Cutters
OPTIONAL PERFORMANCE PROPS
• AquaCraft GrimRacer 40x52/3 Metal 3-blade Prop
(AQUB9720)
• AquaCraft GrimRacer 40x53 Metal Prop (AQUB9715)
EXTRA SUPPLIES
As with any hobby, it is a good idea to assemble a useful
collection of tools and accessories to bring along when
you head to the pond. Here are some items you will want to
keep handy:
Extra “AA” batteries
Extra glow plugs
Spare prop
Small standard screwdriver
Hobby knife
Hex wrenches
Waders or rubber boots
Paper towels
Spray-on cleaner
Sunglasses
Sun block
Folding table
Lawn chair
First-Aid kit
Cooler with plenty of ice and water
Canopy or shelter
Your VS1 does not include a boat stand. You can build one
out of wood or make one from PVC tubing that you buy from
your local home store.