Century Plus 22 - Manual (Page 9)

Place car seat rear-facing on vehicle seat.
Thread vehicle lap belt through car seat Slots
and buckle belt.
NOTE: Vehicle shoulder belt must NOT be
placed through car seat Slots.
Press down firmly on car seat to compress
vehicle seat cushion while tightening vehicle
lap belt (fig. a).
Pull front to back and left to right to check for
secure installation (fig. b).
If not secure, see “Vehicle Seat Belts” section.
Ball MUST be in green zone (fig. c). If
necessary place rolled Towels under car seat
at vehicle seat crease.
NOTE: Vehicle must be on level
ground and child in car seat
when leveling.
Adjust handle to a position
behind car seat.
INSTALLATION WITHOUT BASE
1
2
3
4
7
5
6
(fig. a) (fig. b) (fig. c)
Towels
Slots