AquaCraft Alligator Tours - Manual (Page 5)

5
❏
2. Remove the seat assembly as well as the top of the
radio box and lay them to the side.
❏
3. Install 4 “AA” batteries into the battery holder following
the diagram in molded in the bottom of the holder.
❏
4. Slide the battery box back in the radio box, carefully
tucking the wires in the box.
❏
5. Place the radio box cover as well as the seat assembly in
place and reinstall the screws. Be careful to not overtighten.
At this time you can install the decals on the boat. You can
use the pictures on the box to help you place the decals. Your
Alligator Tours Airboat is now ready for operation.