CLIFFORD Tazor II - Manual (Page 3)

Standard Features of the Tazor II
(cont.)
✔ Patented Malfunction AutoBypass™ —In the unlikely event of a trigger or
sensor malfunction, your Tazor II will automatically bypass the malfunction and
arm all other points to continue relentless protection of your vehicle.
✔ TotalRecall™ — Tazor II’s non-volatile memory automatically stores the identity
of the last activated trigger or sensor activated while the system was armed.
✔ User-Selectable AutoArming™ — Automatically arms itself “passively” if you
forget. May qualify you for an insurance discount that could pay for the system
(consult your insurance company).
AutoArming Enable/Disable — You may disable or re-enable AutoArming
with just a few flicks of a switch.
AutoArm & Lock™ — You may set the system to automatically lock the doors
every time the system AutoArms.
Instant AutoArm Bypass — Just two quick turns of the ignition switch will
bypass AutoArming for one cycle — perfect when fueling the vehicle. The
AutoArming feature is automatically restored the next time you park your car.
✔ High-Output Siren — Loud siren wail for 30 seconds when the alarm detects an
intrusion attempt. The system then automatically resets and rearms.
✔ Patented Remote Control Code Learning — Just a few flicks of a switch lets
you match to the system up to 4 different 2-button/3-channel Clifford remote
controls. Just as easily, a lost or stolen remote control can be deleted.
✔ Advanced CMOS Microcomputer —Very large scale integration (VLSI)
microprocessor commands and monitors all system functions more than
1,000,000 times per second, yet it draws less power than the vehicle’s clock.
✔ Dual-Level Tampering Warning — You may set your Tazor II to issue a rapid
five-chirp warning whenever it detects any tampering. If there is any further
tampering, or if the hood, trunk or a door is opened at any time, Tazor II will
sound a continuous siren blast.
✔ Fault-Proof Starter Interrupt — The system electronically prevents an intruder
from starting the engine while the system is armed.
✔ Hood/Trunk Trigger Input — For full perimeter protection of the engine
compartment and trunk contents (may require optional pin switches).
✔ High-Luminescence LED Status Indicator — Adds visual deterrence and
identifies system status.
✔ Secured Valet Mode — Permits vehicle servicing and valet parking without
relinquishing the remote control.
✔ Patented SmartPowerUp™ II — When power to the system is disconnected, the
system’s non-volatile memory always remembers the last state (armed, disarmed
or valet mode) and returns to that state when power is restored. So if a thief
disconnects the power and then restores it in an attempt to start the car, the
system will re-arm and instantly sound the siren while immobilizing the vehicle.
2