Coleman 5034 - Manual (Page 5)

5
To Set Up
■ Unhook Brace. Insert wire in
receiver hole.
CAUTION NOTE: Use 16.4 oz disposable propane cylinders only. Do not connect to bulk
propane systems. The LP-gas cylinder(s) used with catalytic heaters must be
constructed and marked in accordance with the specifications for LP-gas cylinders
of the U.S. Department of Transportation or Transport Canada, CAN/CSA B339.
■ Attach Heater Assembly to Regulator Assembly hand tight.
• SERVICE SAFETY
• Keep all connections and fittings
clean. Inspect propane cylinder and
heater propane connections for
damage before attaching.
• During set up, check all connections
and fittings for leaks using soapy
water. Bubbles indicate a leak. Never
use a flame.
■ Unit includes Heater
Assembly, Regulator
Assembly, and Support
Leg. Propane tank is not
included.
Support Leg
Regulator Heater
Unhook
Brace
■ Align Support Wire with Hole.
■ Insert Support Wire into Hole.
■ Hook the Brace.
Hook the
Brace
■ Support Brace assembled.