Antari IP-1500 - Manual (Page 9)

9
Press the button FUNCTION until the display indicates “Hibernate Mode”.
Use the button UP and DOWN to turn it “ON” or “OFF”. Hibernate
mode is a power saving feature that will automatically shut down when DMX signal
stops and turn machine back on once DMX signal is detected.
W-1 Wireless Controller
With the wireless controller, it is possible to emit fog via radio over a distance of up to 50
meters.
Press button A, to emit fog. The button A has the same function as the button
VOLUME on the control panel, i.e. the fog output depends on the setting of menu item
“Volume Output“. The display indicates “Volume“ followed by the defined value. As
additional control, the LED lights.
To stop the fog output, press button B.
DMX Connector Pin Assignment
The machine provide 5 pin XLR connector for DMX connection. Diagram below indicate pin
assignment information