Antari AF-3 - Manual (Page 4)

4
For manual control, turn the rotary knob to linearly adjust the wind output from minimum
(-) to maximum (+).
The flashing green light indicates the fan is in stand-by state. When the orange light is
on, the fan is running.
2. Wireless Control (For AF-3R and AF-3XR versions only)
W-1 Wireless Remote Control
Receiver
For wireless remote control, set DIP switch no. 10 to position ON.
All wireless transmitters included in the boxes, have been paired with the wireless
receiver during production at the factory. Users can press button A on the transmitter to
run the fan. Pressing button B stops the fan. Please note, under wireless remote control
mode, the wind output is still controlled by the rotary knob.