Antari F-5D User Manual

Page 5

Product Overview

Setting Up

Step 1:

Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space around the machine.

Step 2:

Fill the fluid tank with Antari approved fluid.

Step 3:

Connect the machine to suitable rated power supply.To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4:

Turn on the machine and allow it to heat up. Heat up takes approximatly 4 mintues.

Once the machine has reached operating temperature, the display will show Ready to

Faze. Now the machine is ready for operation.

Step 5:

To start making haze, press the Volume button on the control panel.

Step 6:

To turn off the machine, hold the STOP button for 3 seconds; the machine will

automatically run a self-cleaning process and shut off after the process is done.

Fog Output Nozzle

XLR 5-Pin DMX Connector

Blue LCD screen, Timer

mode, Volume mode

Neutrik
PowerCon

Breaker

XLR 3-Pin DMX Connector

WDMX Wireless Solution