Antari Z-1520 - Manual (Page 8)

8
Set LED delay time from 0 to 5 seconds.
Turn run last setting function on/off
Wireless Operation
The wireless remote control system W-2 consists of a transmitter equipped with four buttons
to activate four user-configurable LED settings and fog; with an onboard receiver attached to
the rear panel of Z-1520 RGB.
W-2 Wireless Transmitter
Wireless Receiver
Wireless settings are configurable through the onboard control panel, refer to control menu
section to setup each button.
LED Fade Out
Delay: 0 Sec
Run Last Setting
On