AltiGen MAXCS 7.0 Update 1 Salesforce Connector Configuration Guide - Manual (Page 10)

MaxCS 7.0 Salesforce Configuration Guide Page 10 of 17
3. Click Connect CTI Adapter. The login panel opens.
4. Enter your login information and click Log In:
Host -- Enter either the MaxCS Server IP address or the Fully Qualified Domain Name (FQDN);
contact your administrator for this information.
Extension – Enter your extension number.
Password – Enter the password for that extension.
5. Once the MaxCS Connector connects with the MaxCS server, the small left panel should say
“Ready for Calls” as the status.
4
3
5