Classic Crafts Door - Manual (Page 3)

c) WARRANTY PERIOD:
Product
Warranty Holder Classification
Residential Warranty Holder
Commercial/Multi-Resident
Warranty Holder
Fiberglass:
• Classic-Craft
®
Doors
• Fiber-Classic
®
Doors
• Smooth-Star
®
Doors
Lifetime 1 3 Years 3
Steel:
• Profiles
™
(Insulated Steel; Wood Edge Doors.)
10 Years 2 1 Year 3
Steel:
• Traditions (Insulated Steel; Wood Edge Doors.)
5 Years 2 1 Year 3
Steel:
• Therma-Tru
®
Fire Door (TR 12-24) Steel Edge Doors.
15 Years 2
(10 Years 2 within 5 Miles of Salt Water)
1 Year 3
1 Measured from date Product was originally purchased from an authorized dealer and continuing for as long as the original Residential Warranty Holder
owns and resides in the premises in which the Product was installed (“Lifetime Limited Warranty”), unless a shorter duration is expressly stated for the
Product component. Not transferable.
2 Measured from date Product was originally purchased from an authorized dealer and continuing for the stated duration period as long as the original
Residential Warranty Holder owns and resides in the premises in which the Product was installed during that entire duration period. Not transferable.
3 Measured from the earlier of the date Product was shipped from Therma-Tru or an authorized dealer; transferable to successor Commercial/Multi-
Resident Warranty Holder during and for the balance of the original Commercial/Multi-Resident Warranty Period.
d) WARRANTY HOLDER CLASSIFICATIONS:
RESIDENTIAL WARRANTY HOLDERS: If the Product is installed in (i) a new residential dwelling and the first occupant owns the dwelling or (ii) an existing
owner-occupied residential dwelling, and in each case, at the time of installation such owner is also responsible for Product replacement, then that owner
is a Residential Warranty Holder. For example, assume the Product is installed in a condominium unit (a “dwelling”) in a multi-resident building. If the first
occupant of the condominium unit is the first owner of that unit and is also responsible for Product replacement, then that owner is a Residential Warranty
Holder; however, if the owner is not the first occupant or if someone else other than the owner (for example, the condominium association) is responsible
for Product replacement, then the owner is not a Residential Warranty Holder.
COMMERCIAL/MULTI-RESIDENT WARRANTY HOLDERS: If the Product is installed under conditions in which no one qualifies as a Residential Warranty
Holder as described above, then the warranty holder is the owner of the dwelling or building in which the Product has been installed at the time of
installation (and its builder and contractor). That owner is classified as a Commercial/Multi-Resident Warranty Holder. For example, this includes owners
of commercial or investment buildings, or multi-resident premises in which the occupant is not responsible (other than through periodic fees/other
assessments) for Product replacement whether or not the occupant owns the residential dwelling unit in the premises (including by example, certain
condominiums, town homes, duplexes, apartments, cooperatives).
2. WHAT THIS LIMITED WARRANTY DOES NOT COVER
This Limited Warranty does not include non-conformities or damages attributable to or arising from:
a) GENERALLY:
• General wear and tear, including without limitation, wear and tear of weatherstrip, corner seal pads, door bottom sweep (gasket) or the multi-point
locking system.
• Minor scratches or minor visual imperfections outside the Product’s standard manufacturing and quality specification parameters.
• The finish on a multi-point locking system (door handles and lockset) and hinges is not warranted and is purchased “AS IS.” This includes but is not
limited to finish discoloration, tarnishing, scratches, abrasions and visual imperfections. Exposure to certain environmental conditions, including but
not limited to, salt spray, acid rain, high humidity or other corrosive elements may adversely affect the coatings on finishes (as well as the mechanical
and multi-point locking system (door handles and lockset) mechanisms). Timely and proper cleaning of hinges and a multi-point locking system will
help to extend the finish appearance (and mechanical mechanisms) and discourage the possibility of rust and corrosion. Hinges and a multi-point
locking system (door handles and lockset) should be wiped down periodically with a soft, water-dampened cloth and dried off with a soft dry cloth.
Abrasive cleaners or other harsh chemicals should never be used on hinges or a multi-point locking system (door handles and lockset). Maintenance
of the finish (and mechanical mechanisms) is the responsibility of the Warranty Holder.
• The mechanical mechanism on hinges installed within 5 miles of a body of salt water.
• The mechanical and locking mechanism on the multi-point locking system if the Product is installed within (5) miles of a body of salt water or installed
on any steel Products. The Warranty Holder is responsible for maintaining the mechanical features of hinges and the multi-point locking system in
the same manner as noted in the 3
rd bullet above. Therma-Tru does not recommend the use of multi-point locking systems with steel Products. If any
multi-point locking system is used with steel Products, its use is “AS IS” WITH NO WARRANTIES.
• EXPRESS OR IMPLIED WARRANTIES, INCLUDING NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND THE
OTHER PROVISIONS OF SECTIONS 4 AND 5 OF THIS LIMITED WARRANTY APPLY.
• Negligence; improper use; incorrect installation or finishing (with stain, paint or varnish, or in any manner); lack of maintenance (including failure