Curtis RCD-718 - Manual (Page 7)

SPEAKER
Speaker may be placed away from the main unit by unwinding the speaker cable.
AC POWER OPERATION
This unit is designed to operate on 120V, 60Hz current only. Connecting it to other power sour-
ces may damage the unit.
Press the STANDBY/ON button to switch the unit on or off.
Disconnect the power cord from the mains supply if the unit is not going to be used for some
time. You may need to reprogram any memory settings.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference to a
radio tuner nearby, switch this unit off while operating other radio devices.
This product utilizes a laser
Danger - Invisible laser radiation when opened and interlock failed or defeated. Avoid direct
exposure to the beam.
This unit has its own digital clock function in the STANDBY mode. If the unit is Disco-
nnected from the mains, you will need to reset the clock.
The first time you use the unit the clock has to be set.
Press and hold the PROG./MEMORY button for a while on the remote.
24H will flash.
Select 12 Hour/24 Hour mode by pressing the TUNE FORWARD/REW buttons.
Press the PROG./MEMORY to confirm the Time mode on the remote.
HOUR will flash, press (FWD/REW symbols) to adjust the correct hour, then press
PROG./MEMORY button to confirm.
MINUTE will flash, press (FWD/REW Symbols) to adjust the correct minutes,then
ress PROG./MEMORY button to confirm.
For 12 Hour mode, be sure the time is set to AM or PM.
Now the display is showing the correct time you have just set.
" "
" "
" "
p
SETTING THE CLOCK