Unit identification – AirTurn DIGIT User Manual
Page 12
12
5. Lastly, on an iOS device, try resetting the network. (Note:
this procedure will cause you to lose network password
settings and they will have to be re-entered.) Select General,
Settings, Reset, Reset Networks. Recheck connection after the
device restarts.
Go t
for more information and
videos on the BT-105. Additional questions can be emailed to
support @airturn.com.
Unit Identification
The unit name in your Bluetooth host consists of several codes
to help with support and identifying your specific device. For
example:
AirTurn105v128-220A
105 refers to the model number.
V128 refers to the firmware version.
220A refers to the MAC address.
This is helpful if there are many BT-105 units in the same
location. Your MAC address will always be the same so you
can easily identify your unit. You will find your specific MAC
address labeled on the bottom of your BT-105.