Ipcamera&pcconnection, Ip camera & pc connection – Agasio M105I User Manual
Page 9
- 9 -
MFN-E-A3
2.2.3. IP Camera & PC connection
This method does not use frequently, when you process machine write parameter
or program shift, we suggest you to use the first connect network method to process
the modification of machine parameter.
connect power to IP camera (note:
don’t apply for wrong power), after one
minute modification of IP camera, video could be connected via internet cable to IP
camera; under the normal condition, yellow light is on, green light flickers, now
physical connection of IP camera are finished. (In order to connect successfully, we
advise to set camera IP as the stable IP at the same net range of PC in LAN, please
refer to 8 frequent asked questions on how to set camera IP as the stable IP at the
same net range of PC in LAN).