Restoring factory defaults – Agasio A603W User Manual
Page 52
Page | 51
713-893-4514
Figure 19.2
– The Upgrade Device Firmware page
This section is for upgrading your
camera’s firmware and Web UI. The firmware and WebUI should be
available from our support page
for your specific camera. Please be aware that
upgrading your firmware or WebUI could result in some features of your camera not working correctly if
you update the wrong version. If you are unsure of which firmware or WebUI to upgrade, don’t hesitate to
contact us at
You can find the Upgrade Firm
ware page when hovering over “Device Settings,” then clicking on
“Upgrade Device Firmware.” You can upgrade the firmware by clicking “Browse,” locating the downloaded
firmware on your computer, selecting it, and then clicking “Submit.”
20. Restoring Factory Defaults
If you would like to restore the camera to factory default settings within the camera instead of performing
a hard reset, you can do so by hovering over “Device Settings,” and clicking on “Restore Factory
Settings.” When this is clicked, a picture similar to Figure 20.1 will pop up asking to confirm the restore.
Once you click OK, the camera will reset and should appear again within about one minute.
Figure 20.1
– The confirmation window asking you to confirm restoring the factory default settings