Advanced Elements AE1031 User Manual
Page 10
TM
10
3.3
IMPORTANT
Failure to follow these instructions
Be sure to read directions on operating
the spring valves and twist valves located in the section “Understanding your valves”. Before
ak seating area,
place.
1.
2.
There should be just a few wrinkles visible on the side GRAY TUBE COVERS.
3.
4.
5.
6. Make sure all valves are closed tightly and properly.
NOTE: Ideally you want to put about half of the air in Chamber 1 and half into chamber 2. This
way if you were to loose pressure in one chamber then you would have the other chamber to
Inflate chamber 2 “main2” until the kayak feels firm to the touch (2.0 psi max).