Hood latch, air cleaner element – Acura 2002 CL - Owner's Manual User Manual
Page 236
CONTINUED
Clean the hood latch assembly with a
mild cleaner, then lubricate it with a
multipurpose grease. Lubricate all
the moving parts (as shown),
including the pivot. Follow the time
and distance recommendations in
the Maintenance Schedule. If you
are not sure how to clean and grease
the latch, contact your Acura dealer.
The air cleaner element should be
cleaned or replaced according to the
time and distance recommendations
in the maintenance schedule.
Follow the replacement procedure
for removal and reinstallation.
The air cleaner element is inside the
air cleaner housing on the driver’s
side of the engine compartment.
To replace it:
Remove the cruise control cable
from its clip.
Loosen the four bolts by using a
Phillips-head screwdriver and
remove the air cleaner housing
cover.
Clean the air cleaner element by
blowing compressed air through it in
the opposite direction to normal air
flow. If you do not have access to
compressed air (such as a service
station), ask your Acura dealer to do
this service.
1.
2.
On Premium model
Premium model
Hood Latch
Air Cleaner Element
Cleaning (Severe Conditions)
Replacement
Hood Latch, Air Cleaner Element
Maintenance
233
L
L
A
A
T
T
C
C
H
H
A
A
S
S
S
S
E
E
M
M
B
B
L
L
Y
Y
B
B
O
O
L
L
T
T
S
S
Main Menu
Table of Contents