Acura 2010 TL - Advanced Technology Guide - Manual (Page 5)

2. Check the MID:
• If you have the correct remote, the driver ID that appears first on
the MID will match the ID number on the back of your remote.
Go to step 3.
• If the numbers do not match, follow these simple instructions:
- Turn the vehicle off.
- Press the unlock button on your remote.
- Turn the vehicle on again, and check the MID. The driver ID that
appears first on the MID should now match the number on the
back of your remote.
C u s t o m i z i n g S e t t i n g s U s i n g t h e M I D
1. Select “CHG SETTING.”
3. Select “AUTO DOOR
UNLOCK.”
4. Select “SHIFT TO P.”
5. Select “ALL DOORS.”
6. Once the setting has been
saved, select "EXIT."
8
Five groups of settings can be programmed using the MID*: Meter Setup,
Position Setup, Keyless Access Setup (if equipped), Lighting Setup, and
Door/Window Setup.
SEL/RESET
button
Info
buttons
Press the Info button to toggle to
the “Keyless Memory Settings”
display, then press SEL/RESET to
activate the menu.
M o d i f y i n g t h e A u t o D o o r U n l o c k S e t t i n g
* See “Customize Settings” in your owner’s manual for other programmable settings.
K E Y L E S S M E M O R Y S E T T I N G S
Each remote (labeled 1 or 2 on the back) activates its own set of
programmable audio, climate, driving position memory, and customized
settings (MID)*.
1. Verify that you are using the correct remote by turning the vehicle
on.
C h e c k i n g t h e R e m o t e
9
2. Select “DOOR/WINDOW
SETUP.”
3. Once you have the correct remote, you can begin to program your
Keyless Memory settings.
Tech model shown
8 9
10 TL ATG_wbg:ATG_NEW STYLE 8/5/2009 10:57 AM Page 5