Acura 2011 TSX Sport Wagon - Advanced Technology Guide - Manual (Page 16)

M a k i n g a C a l l
Press and release the Talk button before you give a command.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say “Dial.”
3. Say the entire phone
number and “Dial” to
begin call.
4. The call is connected and
heard through the speakers.
Note: You can also use the Interface Dial to complete this procedure.
D i a l i n g a N u m b e r
Press and release the Talk button before you give a command.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say “Phonebook.”
3. HFL imports your phonebook
if not already imported.
4. Once the phonebook
imports, say the number of
the entry you want to call.
Note: You can also use the Interface Dial to complete this procedure.
* Visit www.acura.com/handsfreelink to check if this feature is available on your phone.
U s i n g t h e I m p o r t e d P h o n e b o o k *
29
28
R e c e i v i n g a C a l l
1. When you receive an incoming call, you hear a notification and see
one of the following pop-up messages.
3. Press the Hang-Up button
to end or decline the call.
2. Press the Pick-Up button to
accept the call.
On the audio screen
On the navigation
map screen
On the Cellular
Phone screen
Press and release the Talk button before you give a command.
Note: You can also use the Interface Dial to complete this procedure.
U s i n g S p e e d D i a l a n d V o i c e T a g s
Note: See your owner’s manual for instructions on storing speed
dial entries and accompanying voice tags.
3. The call is connected and
heard through the
speakers.
1. Press the Pick-Up button to
access the Cellular Phone
screen.
2. Say the number next to one of
the first four entries. For
example, “One.” For the
complete list of speed dial
entries, say “More speed dial.”
If an entry has a stored voice
tag, say “Dial by voice tag,”
followed by the voice tag
name and “Dial” from any
screen.
11 TSX 5D ATG:ATG_NEW STYLE 10/27/2011 1:24 PM Page 16