Acura 2013 ZDX - Advanced Technology Guide - Manual (Page 7)

11 10
P r o g r a m m i n g t h e D P M S
2. Adjust your preferred seat,
steering wheel, and outside
mirror settings.
D R I V I N G P O S I T I O N M E M O R Y S Y S T E M ( D P M S )
Store driver’s seat, steering wheel, and side mirror positions into memory for each
corresponding keyless remote (1 or 2), which are recalled when you unlock the
driver’s door with the remote and enter the vehicle.
3. Press SET. You will hear a
beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
Note: Stored positions can also be recalled by pressing one of the
memory buttons (1 or 2) on the door.
1. Turn the vehicle on. Shift into
Park (P).
M U L T I - V I E W R E A R C A M E R A
For added convenience, the area behind your vehicle is displayed to help you
navigate while backing up.
When you shift into Reverse, a
real-time image of the area
behind your vehicle, along with
helpful parking guide lines, shows
in the monitor. It automatically
turns off when you shift out of
Reverse.
H o w I t W o r k s
Press and hold CANCEL for
about 3 seconds.
Adjusting the View Mode
T u r n i n g t h e G u i d e L i n e s
O n o r O f f
S w i t c h i n g V i e w s
There are 3 rearview modes.
Press ENTER to toggle between
views. Turn the Interface Dial to
adjust the screen brightness.
Normal Top Down
Wide
Normal Top Down
Wide
13 ZDX ATG_ATG_NEW STYLE 9/7/2012 10:21 AM Page 7