Acura 2013 RDX - Advanced Technology Guide (Base) - Manual (Page 7)

9
10 11
H o w I t W o r k s
DRIVING POSITION MEMORY SYSTEM (DPMS)
1. Turn the vehicle on. Shift into
Park (P).
3. Press SET. You will hear a
beep.
2. Adjust your preferred seat and
outside mirror settings.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
Note: Each group of settings is activated by the corresponding remote
transmitter (1 or 2) when it is used to unlock the doors. When activated, each
item begins to adjust when you open the driver’s door to enter the vehicle.
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse (R), either door mirror can be tilted downward to improve
your view as you parallel park. Shifting out of Reverse returns the tilted mirror to its
original position.
• To tilt the driver’s door
mirror, push the mirror
selector switch to the left
(L) position when in
Reverse.
• To tilt the passenger’s
door mirror, push the
mirror selector switch to
the right (R) position
when in Reverse.
• To turn the feature off,
push the switch to the
middle position.
Store up to two driver’s seat and mirror positions into memory, which are activated by
the corresponding remote transmitters.
C h a n g i n g t h e D i s p l a y
D i s p l a y O p t i o n s
COLOR INFORMATION DISPLAY
Choose what to display in the center screen.
Press DISPLAY. Rotate the
selector knob to choose and
enter your selection.
Minimum
Show a blank
screen with the
clock.
Clock
(or wallpaper)
Show the clock or
an imported
image. *
* See your Owner’s Manual for instructions on how to upload a wallpaper
image.
Audio/Phone
Show current audio
or phone call
information.
13 RDX ATG_Base:ATG_NEW STYLE 3/16/2012 10:54 AM Page 7