Replacing light bulbs, Headlight bulbs, P. 249 – Acura 2014 TSX - Owner's Manual User Manual
Page 250: P249), 2 replacing light bulbs p. 249

249
Continued
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1. Remove all the engine compartment covers.
2. Remove the engine coolant reservoir.
High beam headlight: 60 W (HB3 for halogen bulb type)
Low beam headlight:
55 W (H1 for halogen bulb type)
35 W (D2S for high voltage discharge type)
■
High Beam Headlight
1
Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the trunk or tow a trailer, have the
aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Engine Coolant Reservoir
4-cylinder models
6-cylinder models
Passenger side
All models
6-cylinder models
Engine Coolant Reservoir
* Not available on all models
14 ACURA TSX 4D-31TL16500.book 249 ページ 2013年6月17日 月曜日 午前9時40分
QRG
Index
2014 TSX
Main
tenan
ce
TOC