Acura 2014 TSX - Advanced Technology Guide - Manual (Page 6)

DRIVING POSITION MEMORY SYSTEM (DPMS)
Store driver’s seat positions into memory for each corresponding remote transmitter
(1 or 2).
P r o g r a m m i n g t h e D P M S
1. Turn the ignition switch to ON (II).
Shift into Park (P) or apply the
parking brake for manual
transmission vehicles.
3. Press SET. You will hear a beep.
2. Adjust the seat to your preferred
position.
4. Within 5 seconds, press the
memory button corresponding
to the remote (1 or 2) you are
using. You will hear two beeps.
Note: Once set, stored positions can be recalled by pressing
one of the memory buttons (1 or 2) on the door.
9 8
R E V E R S E T I L T D O O R M I R R O R
H o w I t W o r k s
When you shift into Reverse (R), the passenger’s outside door mirror tilts down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
• To tilt the passenger’s
door mirror, move the
mirror selector switch
to the right (R) position
when in Reverse.
• To turn the feature off,
move the switch to
the middle or left (L)
position.
R E A R V I E W C A M E R A
( T e c h n o l o g y P a c k a g e )
For added convenience, the area behind your vehicle is displayed to help you
navigate while backing up.
• When you shift into Reverse, a real-time image of
the area behind your vehicle is shown in the
navigation display.
• Yellow parking guidelines also appear to help you
judge distance.
• Adjust the screen brightness by turning the
Interface Dial.
• The display turns off when you shift out of Reverse.
H o w I t W o r k s
14 TSX 4D ATG_ATG_NEW STYLE 5/24/2013 9:14 AM Page 6