Using the remote engine starter – Acura 2008 TSX - Remote Engine Starter Quick Start Guide User Manual
Page 4
Using the Remote Engine Starter
STOP
BUTTON
COMMAND
BUTTON
Note: Remote Control Range (200 ft) depending on where you are, you may experience reduced range reception. See the
User’s Information Manual for more details.
Stopping the Engine
1.
Push the command button on the transmitter for
1 second or less, then push the stop button within
2 seconds.
2.
The transmitter emits a short beep, and sends a signal
to stop the engine. When the engine stops, the OFF
indicator is shown on the display.
This manual is related to the following products:
- 2008 RDX - Remote Engine Starter Quick Start Guide 2008 MDX - Remote Engine Starter Quick Start Guide 2009 TSX - Remote Engine Starter Quick Start Guide 2009 RDX - Remote Engine Starter Quick Start Guide 2009 ZDX - Remote Engine Starter Quick Start Guide 2009 MDX - Remote Engine Starter Quick Start Guide 2010 TSX - Remote Engine Starter Quick Start Guide 2010 TL - Remote Engine Starter Quick Start Guide 2010 RDX - Remote Engine Starter Quick Start Guide 2010 ZDX - Remote Engine Starter Quick Start Guide 2010 MDX - Remote Engine Starter Quick Start Guide 2011 TSX - Remote Engine Starter Quick Start Guide 2011 TL - Remote Engine Starter Quick Start Guide 2011 RDX - Remote Engine Starter Quick Start Guide 2011 ZDX - Remote Engine Starter Quick Start Guide 2011 MDX - Remote Engine Starter Quick Start Guide 2012 TSX - Remote Engine Starter Quick Start Guide 2012 TL - Remote Engine Starter Quick Start Guide 2012 RDX - Remote Engine Starter Quick Start Guide 2012 ZDX - Remote Engine Starter Quick Start Guide 2012 MDX - Remote Engine Starter Quick Start Guide 2013 TSX - Remote Engine Starter Quick Start Guide 2013 TL - Remote Engine Starter Quick Start Guide 2013 MDX - Remote Engine Starter Quick Start Guide 2015 RLX - Remote Engine Starter Quick Start Guide