Installation and set-up – Panasonic TC21S4RP User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION AND SET-UP
TV only
Connect Aerial co-axial cable direct
to TV RF IN socket.
OR
USING A VCR
Connect aerial co-axial cable to RF Input socket of
VCR and a RF co-axial cable from VCR RF Out
socket to TV RF IN socket.
The VCR can also be connected to the TV using a
SCARTto SCARTlead.
Further details of Audio/ Video connections
can be found on page 10.
Ancillary equipment and leads are not supplied.
We recommend that you switch ON the VCR’s test signal - refer to your VCR instruction book.
This manual is related to the following products: