Cardo Systems Cardo S-2 - Manual (Page 6)

6
S-™ Stereo Headphones
S-2 Stereo Headphones
TurNiNG YOur HEadPHONES ON aNd Off
Turning On the Headphones
Press and hold the CTRL Button for 4 seconds until you hear a short
beep. The LED status indicator will then flash blue.
If this is your first time using the headphones, please refer to the
“Pairing Your Headphones” section below.
NOTE: Tap the CTRL Button each time you turn on the
headphones to reconnect the headphones to your mobile phone.
Turning Off the Headphones
Press and hold the CTRL Button for approximately 3 seconds until
you hear a long beep. The LED status indicator will flash red once and
then stop flashing.
PairiNG YOur HEadPHONES
The headphones only work with Bluetooth ® -enabled mobile
phones, stereo Bluetooth ® music players, and/or stereo Bluetooth ®
adapters.
Prior to using and pairing your headphones for the first time, you
must pair them with a Bluetooth ® -enabled mobile phone, stereo