CREATIVE Divi Cam 428 - Manual (Page 16)

3-1 Setting Up Your Camera
3
Setting Up Your Camera
This chapter tells you how to quickly install Creative
DiVi CAM428, as a Mass Storage device. Follow the
installation procedures for your operating system.
Installing the
Camera
Driver
1. Do not connect your camera to your computer
before installing the drivers.
If you accidentally begin installation with your
camera connected, the Add New Hardware
Wizard or Found New Hardware Wizard dialog
box may appear.
If you are using Windows 98 SE, click the Cancel
button. For other operating systems, follow the
instructions on the screen and disconnect your
camera from your computer.
2. Insert the installation CD into your CD-ROM or
CD-ROM/DVD-ROM drive. Your CD should start
automatically. If it does not, follow the steps
below:
i. Double-click the My Computer icon.
Alternatively, click Start
→
My Computer.
ii. Right-click the CD-ROM/DVD-ROM drive icon,
and then click AutoPlay.
3. In the Software Installer screen, click Driver
→
Install. The Choose Setup Language window
appears.
4. Select the desired language, then click the OK
button.
5. Click the Next button to continue. Follow the
instructions on the screen to complete the
installation.
6. Click the Finish button to complete the driver
installation.
7. Follow the instructions in “Setting up Your Camera
as a Mass Storage Device” on page 3-2 to connect
your camera to your computer.
You do not have to restart your computer after
installing the driver.
DiViCam428.book Page 1 Friday, August 26, 2005 10:55 AM